Antimicrobial, Cytotoxic and Mutagenic Activity of Gemini QAS Derivatives of 1,4:3,6-Dianhydro-l-iditol.

A series of quaternary diammonium salts derivatives of 1,4:3,6-dianhydro-l-iditol were synthesized, using isommanide (1,4:3,6-dianhydro-d-mannitol) as a starting material. Both aromatic (pyridine, 4-(N,N-dimethylamino)pyridine (DMAP), (3-carboxamide)pyridine; N-methylimidazole) and aliphatic (trimethylamine, N,N-dimethylhexylamine, N,N-dimethyloctylamine, N,N-dimethyldecylamine) amines were used, giving eight gemini quaternary ammonium salts (QAS). All salts were tested for their antimicrobial activity against yeasts, Candida albicans and Candida glabrata, as well as bacterial Staphylococcus aureus and Escherichia coli reference strains. Moreover, antibacterial activity against 20 isolates of S. aureus collected from patients with skin and soft tissue infections (n = 8) and strains derived from subclinical bovine mastitis milk samples (n = 12) were evaluated. Two QAS with octyl and decyl residues exhibited antimicrobial activity, whereas those with two decyl residues proved to be the most active against the tested pathogens, with MIC of 16-32, 32, and 8 µg/mL for yeast, E. coli, and S. aureus reference and clinical strains, respectively. Only QAS with decyl residues proved to be cytotoxic in MTT assay against human keratinocytes (HaCaT), IC50 12.8 ± 1.2 µg/mL. Ames test was used to assess the mutagenic potential of QAS, and none of them showed mutagenic activity in the concentration range 4-2000 µg/plate.

Design, Synthesis and Tumour-Selective Toxicity of Novel 1-[3-{3,5-Bis(benzylidene)-4-oxo-1-piperidino}-3-oxopropyl]-4-piperidone Oximes and Related Quaternary Ammonium Salts.

A novel series of 1-[3-{3,5-bis(benzylidene)-4-oxo-1-piperidino}-3-oxopropyl]-4-piperidone oximes 3a-h and related quaternary ammonium salts 4a-h were prepared as candidate antineoplastic agents. Evaluation against neoplastic Ca9-22, HSC-2 and HSC-4 cells revealed the compounds in series 3 and 4 to be potent cytotoxins with submicromolar CC50 values in virtually all cases. In contrast, the compounds were less cytocidal towards HGF, HPLF and HPC non-malignant cells revealing their tumour-selective toxicity. Quantitative structure-activity relationships revealed that, in general, both cytotoxic potency and selectivity index figures increased as the magnitude of the Hammett sigma values rose. In addition, 3a-h are cytotoxic towards a number of leukemic and colon cancer cells. 4b,c lowered the mitochondrial membrane potential in CEM cells, and 4d induced transient G2/M accumulation in Ca9-22 cells. Five compounds, namely 3c,d and 4c-e, were identified as lead molecules that have drug-like properties.

Preparation of Antimicrobial Coatings from Cross-Linked Copolymers Containing Quaternary Dodecyl-Ammonium Compounds.

One of the concerns today's societies face is the development of resistant pathogenic microorganisms. The need to tackle this problem has driven the development of innovative antimicrobial materials capable of killing or inhibiting the growth of microorganisms. The present study investigates the dependence of the antimicrobial activity and solubility properties on the hydrophilicity/hydrophobicity ratio of antimicrobial coatings based on quaternary ammonium compounds. In this line, suitable hydrophilic and hydrophobic structural units were selected for synthesizing the antimicrobial copolymers poly(4-vinylbenzyl dimethyldodecylammonium chloride-co-acrylic acid), P(VBCDDA-co-AA20) and poly(dodecyltrimethylammonium 4-styrene sulfonate-co-glycidyl methacrylate), P(SSAmC12-co-GMA20), bearing an alkyl chain of 12 carbons either through covalent bonding or through electrostatic interaction. The cross-linking reaction of the carboxylic group of acrylic acid (AA) with the epoxide group of glycidyl methacrylate (GMA) of these two series of reactive antimicrobial copolymers was explored in blends, obtained through solution casting after curing at various temperatures. The release of the final products in pure water and NaCl 1 M solutions (as analyzed by gravimetry and total organic carbon, TOC/total nitrogen, TN analyses), could be controlled by the coating composition. The cross-linked polymeric membranes of composition 60/40 w/w % ratios led to 97.8 and 99.7% mortality for Escherichia coli (E. coli) and Staphylococcus aureus (S. aureus), respectively, whereas the coating 20/80 w/w % resulted in 96.6 and 99.8% cell reduction. Despite the decrease in hydrophobicity (from a 16- to a 12-carbon alkyl chain), the new materials maintained the killing efficacy, while at the same time resulting in increased release to the aqueous solution.

Synthesis of Purine-Based Ionic Liquids and Their Applications.

Bio-based ionic liquids (ILs) are being increasingly sought after, as they are more sustainable and eco-friendly. Purines are the most widely distributed, naturally occurring N-heterocycles, but their low water-solubility limits their application. In this work, four purines (theobromine, theophylline, xanthine, and uric acid) were combined with the cation tetrabutylammonium to synthesize bio-based ILs. The physico-chemical properties of the purine-based ILs were characterized, including their melting and decomposition temperatures and water-solubility. The ecotoxicity against the microalgae Raphidocelis subcapitata was also determined. The ILs show good thermal stability (>457 K) and an aqueous solubility enhancement ranging from 53- to 870-fold, in comparison to their respective purine percursors, unlocking new prospects for their application where aqueous solutions are demanded. The ecotoxicity of these ILs seems to be dominated by the cation, and it is similar to chloride-based IL, emphasizing that the use of natural anions does not necessarily translate to more benign ILs. The application of the novel ILs in the formation of aqueous biphasic systems (ABS), and as solubility enhancers, was also evaluated. The ILs were able to form ABS with sodium sulfate and tripotassium citrate salts. The development of thermoresponsive ABS, using sodium sulfate as a salting-out agent, was accomplished, with the ILs having different thermosensitivities. In addition, the purine-based ILs acted as solubility enhancers of ferulic acid in aqueous solution.

Design, Synthesis, Antibacterial, and Antitumor Activity of Linear Polyisocyanide Quaternary Ammonium Salts with Different Structures and Chain Lengths.

The development of organic polymer materials for disinfection and sterilization is thought of as one of the most promising avenues to solve the growth and spread of harmful microorganisms. Here, a series of linear polyisocyanide quaternary ammonium salts (L-PQASs) with different structures and chain lengths were designed and synthesized by polymerization of phenyl isocyanide monomer containing a 4-chloro-1-butyl side chain followed by quaternary amination salinization. The resultant compounds were characterized by 1H NMR and FT-IR. The antibacterial activity of L-PQASs with different structures and chain lengths against Escherichia coli (E. coli) and Staphylococcus aureus (S. aureus) was evaluated by determining the minimum inhibitory concentrations (MICs). The L-POcQAS-M50 has the strongest antimicrobial activity with MICs of 27 µg/mL against E. coli and 32 µg/mL against S. aureus. When the L-PQASs had the same polymerization degree, the order of the antibacterial activity of the L-PQASs was L-POcQAS-Mn > L-PBuQAS-Mn > L-PBnQAS-Mn > L-PDBQAS-Mn (linear, polyisocyanide quaternary ammonium salt, monomer, n = 50,100). However, when L-PQASs had the same side chain, the antibacterial activity reduced with the increase of the molecular weight of the main chain. These results demonstrated that the antibacterial activity of L-PQASs was dependent on the structure of the main chain and the length of the side chain. In addition, we also found that the L-POcQAS-M50 had a significant killing effect on MK-28 gastric cancer cells.

Enantioselective synthesis of ammonium cations.

Control of molecular chirality is a fundamental challenge in organic synthesis. Whereas methods to construct carbon stereocentres enantioselectively are well established, routes to synthesize enriched heteroatomic stereocentres have garnered less attention1-5. Of those atoms commonly present in organic molecules, nitrogen is the most difficult to control stereochemically. Although a limited number of resolution processes have been demonstrated6-8, no general methodology exists to enantioselectively prepare a nitrogen stereocentre. Here we show that control of the chirality of ammonium cations is easily achieved through a supramolecular recognition process. By combining enantioselective ammonium recognition mediated by 1,1'-bi-2-naphthol scaffolds with conditions that allow the nitrogen stereocentre to racemize, chiral ammonium cations can be produced in excellent yields and selectivities. Mechanistic investigations demonstrate that, through a combination of solution and solid-phase recognition, a thermodynamically driven adductive crystallization process is responsible for the observed selectivity. Distinct from processes based on dynamic and kinetic resolution, which are under kinetic control, this allows for increased selectivity over time by a self-corrective process. The importance of nitrogen stereocentres can be revealed through a stereoselective supramolecular recognition, which is not possible with naturally occurring pseudoenantiomeric Cinchona alkaloids. With practical access to the enantiomeric forms of ammonium cations, this previously ignored stereocentre is now available to be explored.

Selective capture of toxic anionic dyes of a novel prepared DMDAAC-grafted chitosan/genipin/cellulose hydrogel beads with antibacterial activity.

Novel eco-friendly and green dimethyldiallylammonium chloride (DMDAAC) grafted chitosan/genipin/cellulose hydrogel beads (CCBG-g-PDMDAAC), were fabricated as selective adsorbents for anionic dyes. The physical and chemical structural changes of the prepared hydrogels were evaluated by FTIR, XRD, SEM and TG-DSC analysis. Results showed CCBG-g-PDMDAAC efficiently and selectively adsorb anionic dyes (Reactive Red 195-RR195 and Methyl orange-MO) from mixture of dye solutions. Endowed chitosan-based hydrogels the advantage of acid insolubility and good adsorption. RR195 and MO adsorption process were described better with pseudo-second-order kinetic model and Langmuir isotherm model with a maximum adsorption capacity of 1333.52 and 190.48 mg/g, respectively, indicating that monolayer chemisorption controlled the sorption process. Moreover, the hydrogels exhibited nice reusability and against S. aureus and E. coli. The hydrogels are promising for the potential application in wastewater treatment and antibacterial simultaneously.

Design, Synthesis and In-Vitro Biological Evaluation of Antofine and Tylophorine Prodrugs as Hypoxia-Targeted Anticancer Agents.

Phenanthroindolizidines, such as antofine and tylophorine, are a family of natural alkaloids isolated from different species of Asclepiadaceas. They are characterized by interesting biological activities, such as pronounced cytotoxicity against different human cancerous cell lines, including multidrug-resistant examples. Nonetheless, these derivatives are associated with severe neurotoxicity and loss of in vivo activity due to the highly lipophilic nature of the alkaloids. Here, we describe the development of highly polar prodrugs of antofine and tylophorine as hypoxia-targeted prodrugs. The developed quaternary ammonium salts of phenanthroindolizidines showed high chemical and metabolic stability and are predicted to have no penetration through the blood-brain barrier. The designed prodrugs displayed decreased cytotoxicity when tested under normoxic conditions. However, their cytotoxic activity considerably increased when tested under hypoxic conditions.

Iron(III) Nitrate/TEMPO-Catalyzed Aerobic Alcohol Oxidation: Distinguishing between Serial versus Integrated Redox Cooperativity.

Aerobic alcohol oxidations catalyzed by transition metal salts and aminoxyls are prominent examples of cooperative catalysis. Cu/aminoxyl catalysts have been studied previously and feature "integrated cooperativity", in which CuII and the aminoxyl participate together to mediate alcohol oxidation. Here we investigate a complementary Fe/aminoxyl catalyst system and provide evidence for "serial cooperativity", involving a redox cascade wherein the alcohol is oxidized by an in situ-generated oxoammonium species, which is directly detected in the catalytic reaction mixture by cyclic step chronoamperometry. The mechanistic difference between the Cu- and Fe-based catalysts arises from the use iron(III) nitrate, which initiates a NOx-based redox cycle for oxidation of aminoxyl/hydroxylamine to oxoammonium. The different mechanisms for the Cu- and Fe-based catalyst systems are manifested in different alcohol oxidation chemoselectivity and functional group compatibility.

Novel Phenyl-Based Bis-quaternary Ammonium Compounds as Broad-Spectrum Biocides.

Herein we report the synthesis and microbiological evaluation of novel phenyl based bis-quaternary ammonium compounds (bis-QACs). Using a simple 2-step synthetic route from dibromo- and dihydroxybenzenes, we obtained a structurally diverse broad panel of bis-QACs with topologically distinct bridging connections between pyridinium heads. Selected analogs possessed potent broad-spectrum biocidal activity against both bacterial and fungal pathogens: methicillin-resistant Staphylococcus aureus (ATCC 43300); Escherichia coli (ATCC 25922), Klebsiella pneumonia (ATCC 700603), Acinetobacter baumannii (ATCC 19606), Pseudomonas aeruginosa (ATCC 27853), Candida albicans (ATCC 90028), Cryptococcus neoformans var. grubii (ATCC 208821). Promising compounds displayed minimum inhibitory concentrations (MIC) values ≤0.25 µg/mL alongside improved cytotoxicity and hemolytic profiles compared to modern antiseptics. Thus, synthesized bis-QACs represent a promising class of biocides with the potential to replace existing household sanitizers.

Orthogonal Design of a Water-Soluble meso-Tetraphenylethene-Functionalized Pillar[5]arene with Aggregation-Induced Emission Property and Its Therapeutic Application.

An orthogonal strategy was utilized for synthesizing a novel water-soluble pillar[5]arene (m-TPEWP5) with tetraphenylethene-functionalized on the bridged methylene group (meso-position) of the pillararene skeleton. The obtained macrocycle exhibit both the aggregation-induced emission (AIE) effect and interesting host-guest property. Moreover, it can be made to bind with a tailor-made camptothecin-based prodrug guest (DNS-G) to form AIE-nanoparticles based on host-guest interaction and the fluorescence resonance energy transfer process for fabricating a drug delivery system. This novel type of water-soluble AIE-active macrocycle can serve as a potential fluorescent material for cancer diagnosis and therapy. In addition, the present orthogonal strategy for designing meso-functionalized aromatic macrocycles may pave a new avenue for creating novel supramolecular structures and functional materials.

Environmentally Friendly Cross-Linked Antifouling Coatings Based on Dual Antimicrobial Action.

The synthesis of environmentally friendly antimicrobial polymeric coatings, especially in the case of aquaculture, that inhibit the growth of bio-deposits is a very important issue that will contribute to the cost reduction of nets' cleaning process as well as the protection of the submarine wealth from the biostatic substances used so far. In the present work, the antimicrobial polymers P(SSAmC16-co-VBCHAMx) and the terpolymer P(SSAmC16w-co-VBCHAMx-co-GMAy) were synthesized, bearing quaternary ammonium compounds, electrostatically bound and covalently attached at the same polymer chain. The combination of the two types is of particular importance, as it can provide effective antimicrobial polymeric materials with self-polishing capabilities as a result of the released nature of the antimicrobial, in combination with the permanent local action of the immobilized species. The cross-linking reaction of the terpolymer P(SSAmC16w-co-VBCHAMx-co-GMAy) with the homopolymer polyacrylic acid (PAA) was tested at 120 °C in terms of the equivalent ratio between epoxy and carboxyl groups. The synthesized polymers were further used for the coating of aquaculture nets and tested in terms of antifouling efficiency in lab and scale-up conditions. Uncoated nets were also used in all applications for comparison reasons. The coated nets performed efficiently for 35 days in lab-scale and 66 days in scale-up conditions, showing a high antifouling activity in both fields compared to the uncoated nets.

Synthesis of Ag@chitosan/copolymer with dual-active centers for high antibacterial activity.

The prevention and treatment of microorganism contamination on substrate surfaces have recently generated significant concern of scientists. In this paper, a novel diblock copolymer containing antibacterial quaternary ammonium groups as pendant groups, poly(3-(methacryloylamino) propyltrimethyl ammonium chloride)-b-poly(styrene) (PMS), was synthesized by interfacial polymerization. Also, PMS anisotropic particles (APs) could be successfully obtained based on different assembly behaviors by adjusting the ratios of monomers and the toluene/styrene (Tol/St). Moreover, silver loaded chitosan (Ag@CS) and PMS APs were combined to prepare natural/synthetic polymer antibacterial materials with dual-active centers (Ag@CS/PMS-4 APs), aiming to expand the application of carbohydrate polymers and improve the antibacterial activity of composite materials. Remarkably, the resulting series of PMS particles, especially worm-like PMS-4 APs, and Ag@CS/PMS-4 APs composite film ((Ag@CS/PMS-4 APs)-F) exhibited excellent antibacterial properties, which can be employed as interface materials to prevent the transmission of infectious diseases caused by microorganism contamination.

Trivalent sulfonium compounds (TSCs): Tetrahydrothiophene-based amphiphiles exhibit similar antimicrobial activity to analogous ammonium-based amphiphiles.

Recent advances in the development of quaternary ammonium compounds (QACs) have focused on new structural motifs to increase bioactivity, but significantly less studied has been the change from ammonium- to sulfonium-based disinfectants. Herein, we report the synthesis of structurally analogous series of quaternary ammonium and trivalent sulfonium compounds (TSCs). The bioactivity profiles of these compounds generally mirror each other, and the antibacterial activity of sulfonium-based THT-18 was found to be comparable to the commercial disinfectant, BAC. The development of these compounds presents a new avenue for further study of disinfectants to combat the growing threat of bacterial resistance.

Synthesis and Properties of Cleavable Quaternary Ammonium Compounds.

Quaternary ammonium compounds are widely used as antiseptic and disinfectant. It is been a concern that their widespread use will lead to an increase of environmental problems, therefore the development of biodegradable surfactants is necessary. The present research is aimed at the design of novel amphiphilic molecules with similar properties to those already known but more biodegradable. Based on benzalkonium chloride (BAC), novel carbonate cleavable surfactants (CBAC) were synthesized. The breakable carbonate sites make CBAC compounds more degradable and potentially more biodegradable than their non-cleavable BAC analogues. Natural products such as fatty alcohols (C8-C16) and N,N-dimethyl-2-aminoethanol were used as reagents for the synthesis of CBAC8-16. These amphiphilic compounds were characterized in terms of surface properties and antimicrobial activity against Gram-positive and Gram-negative bacteria, yeasts and moulds. The novel surfactants showed similar surface activities in aqueous solutions when compared to BAC. Also, the surface activity/structure relationship revealed that carbonate cleavable surfactants with n-decyl group (CBAC10) showed the same behaviour as non-cleavable BAC. Furthermore, compounds containing n-octyl (CBAC8), n-decyl (CBAC10) and n-dodecyl (CBAC12) group showed strong antimicrobial activities.

Novel boronium salt exhibits substantial antibacterial activity when compared to a commercial quaternary ammonium disinfectant.

Commercial disinfectants are routinely used to decontaminate surfaces where microbes are expected and unwelcome. Several disinfectants contain quaternary ammonium salts, or "quats", all being derived from ammonium. Quaternary alkyl dimethyl benzyl ammonium chloride or bromide disinfectants are widely available. These compounds are effective in reducing or eliminating bacteria on contaminated nonporous surfaces. A unique benzyl derived boronium salt with strong detergent action has been developed. It demonstrated 4-8X greater antibacterial activity against 3 different bacteria when compared to an equal concentration of a commercial quant disinfectant solution containing alkyl dimethyl benzyl ammonium chloride and alkyl dimethyl ethylbenzyl ammonium chloride. Antibacterial effectiveness of each agent was determined by the minimum inhibitory concentration (MIC) method.

Novel quaternary ammonium compounds derived from aromatic and cyclic amino acids: Synthesis, physicochemical studies and biological evaluation.

Novel quaternary ammonium surfactants (QUATs) derived from phenylalaninyl-proline dipeptide with chain length C12 and C14 were synthesised as potential active ingredients to be used in body cleansing formulations. The physicochemical properties and biological activities of the QUATs were determined in both single and in mixed surfactant system with either the conventional anionic surfactant sodium dodecyl sulphate (SDS) or sodium N-dodecyl prolinate. The C12 QUAT derivative showed antagonistic behaviour in both SDS and sodium N-dodecyl prolinate mixed surfactant system. Comparing the mixed system of the C12 QUAT with SDS and sodium N-dodecyl prolinate, it was found that the latter displayed better antibacterial activity together with the lower ocular irritation. The C12 QUAT-sodium N-dodecyl prolinate mixture were non cytotoxic at a concentration corresponding to its MIC value, showing that the mixture was selective towards bacterial cells rather than mammalian cell lines. Diffusion measurements showed that the sodium N-dodecyl prolinate surfactant consisted of 26 molecules per micelle in water but only 3 molecules per micelle in DMSO/water (1:1). On the other hand, C12 QUAT did not form a micelle in DMSO/Water. Membrane permeability studies of the C12 QUAT and sodium N-dodecyl prolinate showed that these surfactants are capable to penetrate into deeper skin layers to exert their antibacterial and cleansing action and hence can be used as a promising candidate as active ingredients in body wash formulations.

Design, synthesis, antibacterial activity and toxicity of novel quaternary ammonium compounds based on pyridoxine and fatty acids.

A diverse series of 43 novel "soft antimicrobials" based on quaternary ammonium pyridoxine derivatives which include six-membered acetals and ketals of pyridoxine bound via cleavable linker moieties (amide, ester) with a fragment of fatty carboxylic acid was designed. Nine compounds exhibited in vitro promising antibacterial activity against Gram-positive and Gram-negative bacterial strains with MIC values comparable with reference antiseptics miramistin, benzalkonium chloride and chlorohexidine. On various clinical isolates, the lead compounds 6i and 12a exhibited antibacterial activity comparable with that of benzalkonium chloride while higher than that of miramistin. Moreover, 6i and 12a were able to kill bacteria embedded into the matrix of mono- and dual species biofilms. The treatment of bacterial cells by either 6i and 12a lead to fast depolarization of the membrane suggesting that the membrane is an apparent molecular target of compounds. 6i and 12a were non mutagenic neither in SOS-chromotest nor in Ames test and non-toxic in vivo at acute oral (LD50 > 2000 mg/kg) and cutaneous administration (LD50 > 2500 mg/kg) on mice. Taken together, our data allow suggesting described active compounds as promising starting point for the new antibacterial agents development.

Synthesis, characterization and biological evaluation of octyltrimethylammonium tetrathiotungstate.

Octyltrimethylammonium tetrathiotungstate salt (ATT-C8) was synthesized and its ability to chelate copper was evaluated. The biological and toxic aspects were evaluated by in vitro and in vivo assays, using bovine aorta endothelial cells (BAEC) and zebrafish (Danio rerio) embryos. The obtained results suggest that ATT-C8 has better biocompatibility, showing a significantly lower lethal concentration 50 (LC50) value in comparison to ammonium tetrathiotungstate (ATT). Zebrafish embryos assay results indicate that both tetrathiotungstate salts at the studied concentrations increase the hatching time. Even more, an in vivo assay showed that synthesized materials behave as copper antagonists and have the ability to inhibit its toxicological effects. Also, both materials were found to be active for the in vitro 2,2-diphenyl-1-picrylhydrazyl (DPPH) assay. The characterization of the materials was carried out using the following spectroscopic techniques: Ultraviolet-Visible (UV-Vis), Fourier Transform Infrared (FTIR) and proton nuclear magnetic resonance (1H-NRM).

GO crosslinked hydrogel nanocomposites of chitosan/carboxymethyl cellulose - A versatile adsorbent for the treatment of dyes contaminated wastewater.

Graphene oxide (GO) crosslinked nanocomposites hydrogels (NCH) of chitosan (CS) and carboxymethyl cellulose (CMC) were synthesized and the feasibility of its application as a versatile adsorbent for the remediation of cationic (methylene blue, MB) as well as anionic (methyl orange, MO) dyes contaminated wastewater was explored. Initially, GO was functionalized with vinyltriethoxysilane which was subsequently used as a chemical crosslinker to synthesize the NCH of CS and CMC (CS/CMC-NCH) with the polymeric mixture of diallyldimethylammonium chloride and 2-acrylamido-2-methyl-1-propanesulfonic acid. About 99% dye was adsorbed from 50 mg/L dye solution of MB dye with 0.4 g/L of CS/CMC-NCH at pH 7, whereas, for MO about 82% dye was adsorbed with 0.6 g/L of CS/CMC-NCH at pH 3. The Adsorption of both dyes is well explained using pseudo-second-order and Langmuir models with the maximum adsorption capacities of 655.98 mgdye/gads for MB and 404.52 mgdye/gads for MO. Thermodynamics studies suggested spontaneous and exothermic nature of the adsorption process with values of ΔS < 0 and ΔH > 0. Furthermore, CS/CMC-NCH showed excellent regeneration capacity for continuous twenty cycles of adsorption-desorption. Therefore, the synthesized CS/CMC-NCH is a versatile adsorbent that can treat both anionic and cationic dyes contaminated wastewater.